https://www.youtube.com/watch?v=rmRaMSQWEFY&feature=youtu.be

  • Free Shipping on orders over $149 exclusions apply

    X

    Receive Free Shipping within the Contiguous United States when placing a qualifying order of $149 or more, exclusive of tax, with the following exclusions:

    Part Numbers: DL034, DL047-500, DL048-500, DL049-500, DL050-500, DL050-1000, DL052, DL054, DL077, DL078, DL081, DL082, DL300-250CV, DL305-250CV, DL310-250CV, DL315-250CV, DL320-500CV, K009, K-D500, K-D500C, K-VEG500, K-VEG1000, T001, T002, T005, T015, T016, T021, T039, T042, T070, T072, T100, T101, T103, T302, T303, T540, T710-500

    If your order includes any of these products, the UPS ground shipping quote will only apply to them.

  • 1(877) 597-1669 Monday - Friday, 7am to 4pm PST


  • Shopping Cart (0) items

Green Spot-Spitter Spray Stick; 160 Degree Spray Pattern; Flow Rate 9.6-13.2 GPH

Be the first to review this product

Product Number: D301

The green spot-spitter , spray stick with flow rate of 9.6-13.2 GPH and 160 degree spray pattern from the John Deere Water Product line, is one of the most cost-effective, versatile solutions for your nursery watering application.

  • Buy 100 for $0.12 each and save 15%
  • Buy 5000 for $0.11 each and save 22%
$0.14

Availability: In stock

Spot-Spitters, 160 Degree Spray Stick, Flow Rate 9.6-13.2 GPH Color Green

Specification

  • Droplet Size: Small
  • Filter requirement: Minimum of 120 Mesh
  • Flow rate: 9.6 to 13.2 GPH
  • Micro tubing size used : 1/8" with .125 ID x 0.187 OD (poly)
  • Operating pressure: 15 to 25 PSI
  • Pattern: 160°
  • Standard length stake: 4.8"

Features

  • Made of durable materials, ensuring resistance to most chemicals and fertilizers
  • Spot-Spitter is for use in pots, boxes or containers in nursery or home applications
  • The Spot-Spitter has a spray direction indictor
  • Trouble free operation even at low pressure

Description

The spot-spitter spray stick controls water flow at the emitter stick, where it matters most. Other mini-sprayer sticks may require tedious, labor-intensive modifications of tubing and lengths to develop the flow characteristics desired. You can install the spot-spitter in seconds, selecting the proper flow rate and pattern and using the correct 1/8” micro tubing with the specified ID. Unlike other mini-sprayer sticks which tend to deform or break at the spray tip, the spot-spitter is made from premium UV-resistant resins, which resist tip damage and provide years of trouble-free operation in both indoor and outdoor applications.

Note: the flow rate is achieved at a pressure rating of 15 to 25 PSI and using the 1/8” micro tubing with 0.125 ID x .0.187 OD.

 

Applications

  • For pots or boxes 6” to 10” in diameter
  • Recommended for use in nurseries and green houses

installation video

instruction

Installation for Spot Spitters:

 

To install the Spot-Spitter, use the suggested micro tubing with the correct ID and OD.

To replace the spray stick, just pull it out of the micro tubing, and replace with a new head of the same color.

Make sure to flush the line before inserting the new spray stick. No tool or glue is required.

 

To install the Spot-Spitter into the drip tubing lateral:

 

Select the flow rate and the spray stick degree of coverage, then insert the spray stick into the 1/8” micro tubing.

Punch a hole into the side of the drip tubing using a 4 mm punch, and then insert the micro tubing into the drip tubing. 

No barb connector or other parts are needed.