1/2" (.700 OD) Compression Coupling

Sometimes you just need ten more feet of tubing to reach the end of your row, sometimes a critter chews a hole in your tubing and you need to replace a length of it, and sometimes you just cut it too short. Either way, you're in the right place. The LF001 1/2" coupler does one thing, and it does it very well: it connects two pieces of 1/2" poly drip tubing together. There is beauty in simplicity!

This fitting (and all the other 1/2" compression fittings with black ends that we sell) works with .600 ID x .700 OD poly drip tubing and brown 17mm tubing and dripline. Push the tubing into the end of the fitting firmly and at an angle, then walk it up and down while pushing in until the tubing is inside the fitting by at least half an inch. Be aware that once you've gotten the tubing into the fitting it's very difficult to remove it!