1/2" (.700 OD) Compression Tee with 3/4" MHT

Want to split your line but have an inconvenient 3/4" FHT fitting to work with? Then the LF150 tee is the perfect item for you. This is basically the inverse of the LF009 swivel tee: instead of a 3/4" FHT swivel, it has a 3/4" MHT fitting. If you're looking for an item like this that will work with a hose or spigot, check out the LF009. It's a niche item, but if you're in a position where you need it you'll be happy to have it.

This fitting (and all the other 1/2" compression fittings with black ends that we sell) works with .600 ID x .700 OD poly drip tubing and brown 17mm tubing and dripline. Push the tubing into the end of the fitting firmly and at an angle, then walk it up and down while pushing in until the tubing is inside the fitting by at least half an inch. Be aware that once you've gotten the tubing into the fitting it's very difficult to remove it!