1" MNPT X 8" in length Sch.80 Riser

• Molded gray schedule 80 PVC construction
• Use to connect underground PVC pipe or poly pipe with 1/2”, 3/4” and 1" MNPT outlet thread to a sprinkler head, drip head or other component of the irrigation system
• Use risers to raise a sprinkler head or retrofit a drip head to the level you need
• High-quality PVC construction
• Use with Teflon tape
• For outdoor use with cold water only
• Use as common component in most sprinkler irrigation systems

Note: Wrap riser’s threads with Teflon tape! Do not use pipe cement as this will damage the riser and void the warranty!

1. Screw the riser into a subsurface PVC tee or elbow of appropriate size.

2. Turn the water on and flush the line.

3. Turn the water off and attach sprinkler or drip head.

4. Turn the water on again and pressure test the system to identify leaks in the threads connections.

• Pressure Rating: Up to 150PSI
• Size: 1" MNPT with Sch. 80 PVC construction
• Length: 8"
• Color: Gray
• Grade 1, with a Cell Classification of 12454 as defined in ASTM D1784
• Temperature Range: Up to 140 degrees F
• Materials: Domestically produced rigid polyvinyl chloride (PVC) compound, type 1