3/4" Compression Coupling (.940 OD)

Sometimes you just need ten more feet of tubing to reach the end of your row, sometimes a critter chews a hole in your tubing and you need to replace a length of it, and sometimes you just cut it too short. Either way, you're in the right place. The LF330 3/4" coupler does one thing, and it does it very well: it connects two pieces of 3/4" poly drip tubing together. There is beauty in simplicity!

This fitting (and all the other fittings on our 3/4" fittings page) works with .820 ID x .940 OD poly drip tubing, regardless of manufacturer. Push the tubing into the end of the fitting firmly and at an angle, then walk it up and down while pushing in until the tubing is inside the fitting by at least half an inch. Be aware that once you've gotten the tubing into the fitting it's very difficult to remove it!