delivery_icon_-_the_drip_store

877-597-1669

MON-FRI: 7:30AM - 4PM MST 
delivery_icon_-_the_drip_store

Free Shipping On Orders Over $50

Find Out More Here

3/4" Compression End Cap with Flush Valve (.940)

TDS Model #
LF340
Manufacturer: The Drip Store

This product qualifies for Free Shipping With an order total of $50 or more.
(Excluding Tax & Shipping)

Details Here

Model #LF340
$2.64

You probably already know that you need to plug up the ends of your 3/4" mainline tubing in order for the system to pressurize, right? Well, if you didn't know before you definitely know now. There are a lot of different ways to accomplish this, but the LF340 offers the most bang for your buck. It features an auto-flush valve, meaning it lets your line drain after every run to keep your system as clean as possible. When the system turns on and pressure reaching .6 PSI, the valve at the end closes. When the system turns off and the pressure drops back below 1 PSI, the valve opens again, allowing water to drain out. Just like the LF334, it has a 3/4" MHT threaded end underneath the valve, making it easy to attach to other hose thread fittings if you need to expand your system.

This fitting (and all the other products on our 3/4" fittings page) works with 3/4" .820 ID x .940 OD poly drip tubing.

To use this fitting, push the tubing into the end of the fitting firmly and at an angle, then walk it up and down while pushing in until the tubing is inside the fitting by at least half an inch. Be aware that once you've gotten the tubing into the fitting it's very difficult to remove it!

OR
  • RELATED PRODUCTS
  • DESCRIPTION
  • FEATURES
  • SPECIFICATIONS
  • REVIEWS