3/4" Spin-Loc x 3/4" MPT

A hose spigot is all well and good to use for a drip system, but what if you don't have one around? If you're working with a pipe thread fitting, like a solenoid valve, as the head of your system, then a threaded fitting like this is exactly what you need to connect your 3/4" .940 OD poly drip tubing to your water source. This fitting has a 3/4" MPT base, which means it won't work with hose thread fittings (and that you'll want to use some teflon tape on it!). The other end is a 3/4" spin-loc fitting designed to work with 3/4" .940 OD poly drip tubing.

To use this fitting, screw the nut all the way down against the base of the fitting, push the tubing onto the barb, then screw the nut back down over the tubing. Do not unscrew the nut and push the tubing through it, that's not the way the fitting is designed to work!