3/4" MPT Filter 155 Mesh Filter with Polyester Element
| Manufacturer: | DIG |
|---|---|
| Manufacturer #: | P10-155 |
This product qualifies for Free Shipping With an order total of $50 or more.
(Excluding Tax & Shipping)
Details Here
- RELATED PRODUCTS
- DESCRIPTION
- FEATURES
- SPECIFICATIONS
- REVIEWS
Screen filters are the most common filters used in the irrigation industry. They are generally used as a backup for any type of drip irrigation installation and are mainly installed where the quality of water is good. Screen filters are excellent for removing hard particulates from water such as sand, soil, and pieces of hard water buildup that can be found in city and well water. Screen filters are not suitable for removing organic materials such as algae, mold and slime. These non-solid materials tend to embed themselves into the screen material where they prevent water from passing through, clogging the filter. In other cases they slide through the holes in the screen by temporarily deforming their shape. To clean a screen filter simply unthread the cover, remove the element, and wash under a stream of water.
150 and 155 mesh filters are considered "standard" and will filter out material large enough to cause clogs in standard drippers. Coarser filters (less than 150 mesh) can be used to filter larger material, while finer filters (such as 200+ mesh) are better suited for filtering smaller particles, such as very fine sand.
Do not put this item upstream of a valve, timer, or spigot. This item is not designed to operate under constant pressure, and installing it upstream of a valve, timer, or spigot will cause it to leak and fail. Only install it after the valve, timer, or spigot.
- FEATURES
- All-purpose filter with a wide range of polyester and stainless steel screens from 40 to 200 mesh to suit a wide range of filtration requirements
- Screens have excellent resistance to most common chemicals
- Color-coded replacement screens for easy identification
- Large filter area and low friction loss allows long intervals between cleaning
- Available with flush cap or flush valve for easy flushing of particles trapped in the bottom of filter.
- Recommended to be installed and used after the backflow and/or control valve.
- Easy maintenance - the screen can be extracted from the filter for easy cleaning
- Interchangeable screen and disc elements
- Constructed of UV-resistant, durable plastic material to withstand the most adverse conditions
SPECIFICATION - Flow rates: up to 18 GPM (4 m3/h)
- Operating pressure: up to 120 PSI (8.4 BAR)
- Temperature range: up to 130°F (54°C)
- Stainless steel and polyester screens from 40 to 200 mesh
- Inlet and outlet size: 3/4" FHT x MHT and 3/4" or 1" MPT
- Materials:
- Housing: polypropylene
- O-ring: EPDM
- Pressure testing port: polypropylene
- Pressure testing seals: natural rubber BR
