3/4" MPT 150 Mesh Plastic Disc Filter
| Manufacturer: | DIG |
|---|---|
| Manufacturer #: | P30-150D |
This product qualifies for Free Shipping With an order total of $50 or more.
(Excluding Tax & Shipping)
Details Here
- RELATED PRODUCTS
- DESCRIPTION
- FEATURES
- SPECIFICATIONS
- REVIEWS
Filters with a disc element (example) offer better performance than screen filters, being effective at filtering organic matter in addition to particulate matter like sand and soil. Unlike screen filters, disc filters consist of stacked round grooved discs, which utilize three-dimensional filtration to stop organic materials, sand, and other particulate matter. The numerous small grooves on each side of the stacked discs act to disrupt and then block flow of organic material as the water moves through the filter. A disc filter element is comprised of a stack of these grooved discs.
Like screen filters, disc filters also need to be cleaned periodically. To clean a disc filter element, unscrew the filter canister and remove the element. Twist the end without the o-ring to loosen the stack of discs. From there you can either use pressurized water to clean the discs or take them off of the element entirely to soak them in a cleaning solution or clean each disc individually.
150 and 155 mesh filters are considered "standard" and will filter out material large enough to cause clogs in standard drippers. Coarser filters (less than 150 mesh) can be used to filter larger material, while finer filters (such as 200+ mesh) are better suited for filtering smaller particles, such as very fine sand.
Do not put this item upstream of a valve, timer, or spigot. This item is not designed to operate under constant pressure, and installing it upstream of a valve, timer, or spigot will cause it to leak and fail. Only install it after the valve, timer, or spigot.
- FEATURES
- Color-coded disc replacements and screens are interchangeable and easy to identify
- Disc element provides in-depth filtration due to the discs’ outer surface area and the depth of the disc element for retaining organic matters
- Disc elements have excellent resistance to most common chemicals
- Easy maintenance: the disc element assembly can be extracted from the filter for easy cleaning
- Large filtration area allows longer intervals between flushing
- Low friction loss
- Non corrosive materials
- Sediments accumulate on the outer face of the stacked disc, allowing clean water to flow through the staked discs out of the filter
SPECIFICATION - Filter disc elements: 150 mesh (color black)
- Filter configuration: 3/4" NPT male inlet and outlet
- Filter cylinder length: 5"
- Filter dimensions: 3/4" 4.7/8" H x 7" W
- Filter surface area: 28 square inches
- Maximum flow rate: 3/4": 18 GPM
- Maximum working temperature: 130 degree F
- Operating pressure: up to 120 PSI
- Size:3/4"
- Materials
- Disc Cylinder Assembly: PBT
- Disc: Polypropylene
- Filter housing: Polypropylene
- Grooved Discs: Polypropylene
- O-ring: EPDM