Ro-Drip Drip Tape to Lay Flat

Large-diameter lay flat tube is often used as a supply line for large commercial or agricultural drip tape systems, running across the areas that don't need to be watered. Once the lay flat is where you want it, you'll need to connect your drip tape to it. The A099 makes that connection a snap!

NOTE: we do not sell any lay flat tools capable of making the right sized hole in lay flat tube to use this fitting. We also don't sell any lay flat tubing. If you want to use this fitting, make sure you have another source for the other required items.

This fitting (and all the other drip tape fittings that we sell) works with 5/8" 15mil drip tape.

To use the spin-loc side of this fitting, screw the nut all the way down against the base of the fitting, push the tubing onto the barb, then screw the nut back down over the tubing. Do not unscrew the nut and push the tubing through it, that's not the way the fitting is designed to work! To use the other side, first use a lay flat tool to cut a hole in the pipe and then insert the lay flat side of the fitting and secure by twisting it inside the lay flat pipe.