1.5" MPT 150 Mesh Plastic Disc Filter
| Manufacturer: | DIG |
|---|---|
| Manufacturer #: | P75-150DL |
This product qualifies for Free Shipping With an order total of $50 or more.
(Excluding Tax & Shipping)
Details Here
- RELATED PRODUCTS
- DESCRIPTION
- FEATURES
- SPECIFICATIONS
- REVIEWS
Filters with a disc element (example) offer better performance than screen filters, being effective at filtering organic matter in addition to particulate matter like sand and soil. Unlike screen filters, disc filters consist of stacked round grooved discs, which utilize three-dimensional filtration to stop organic materials, sand, and other particulate matter. The numerous small grooves on each side of the stacked discs act to disrupt and then block flow of organic material as the water moves through the filter. A disc filter element is comprised of a stack of these grooved discs.
Like screen filters, disc filters also need to be cleaned periodically. To clean a disc filter element, unscrew the filter canister and remove the element. Twist the end without the spring to loosen the stack of discs. From there you can either use pressurized water to clean the discs or take them off of the element entirely to soak them in a cleaning solution or clean each disc individually. When putting the element back into the housing, put the spring side of the element facing down, away from the threaded ends.
150 and 155 mesh filters are considered "standard" and will filter out material large enough to cause clogs in standard drippers. Coarser filters (less than 150 mesh) can be used to filter larger material, while finer filters (such as 200+ mesh) are better suited for filtering smaller particles, such as very fine sand.
- FEATURES
- Color-coded discs are interchangeable with screens and are easily identified
- The disc provides in-depth filtration due to the discs' outer surface area and the depth of the grooved discs in retaining organic matters and debris
- The discs have excellent resistance to most common chemicals
- Easy maintenance: the disc set can be extracted from the filter for easy cleaning
- Large filtration area allows longer intervals between flushing
- Low friction loss
- Non corrosive materials
SPECIFICATION - Filter configuration: 1 1/2" NPT male inlet and outlet
- Filter disc elements: 150 mesh (color black)
- Maximum flow rate: 50 GPM
- Operating pressure: up to 120 PSI
- Maximum working temperature: 130 degree F
- Filter cylinder length: 8.7"
- Filter dimensions: 10.1" W x 9.45" H
- Disc filter surface area: 60 square inches
- Materials:
- Disc cylinder assembly: PBT
- Disc: Polypropylene
- Filter housing: Polypropylene
- Grooved discs: Polypropylene
- O-ring: EPDM