155 Mesh Stainless Steel Replacement Screen for 3/4" and 1" Filters
| Manufacturer: | DIG |
|---|---|
| Manufacturer #: | 17-414 |
This product qualifies for Free Shipping With an order total of $50 or more.
(Excluding Tax & Shipping)
Details Here
- RELATED PRODUCTS
- DESCRIPTION
- FEATURES
- SPECIFICATIONS
- REVIEWS
Screen filters are the most common filters used in the irrigation industry. They are generally used as a backup for any type of drip irrigation installation and are mainly installed where the quality of water is good. Screen filters are excellent for removing hard particulates from water such as sand, soil, and pieces of hard water buildup that can be found in city and well water. Screen filters are not suitable for removing organic materials such as algae, mold and slime. These non-solid materials tend to embed themselves into the screen material where they prevent water from passing through, clogging the filter. In other cases they slide through the holes in the screen by temporarily deforming their shape. To clean a screen filter simply unthread the cover, remove the element, and wash under a stream of water.
150 and 155 mesh filters are considered "standard" and will filter out material large enough to cause clogs in standard drippers. Coarser filters (less than 150 mesh) can be used to filter larger material, while finer filters (such as 200+ mesh) are better suited for filtering smaller particles, such as very fine sand.
- FEATURES
- Available sizes: 3/4", 1", 1-1/2" and 2"
- Color-coded replacement screens
- Easy maintenance: the screen can be extracted from the filter for easy cleaning
- For 3/4" and 1" filters: Model #’s F300 through F313 and F060 through F075
- 3/4" and 1" screen filter elements are 6" long
- Large filtration area allows longer intervals between flushing
- Low friction loss
- Molded plastic construction with stainless steel screen
- Non corrosive materials
- Polyester screen and Stainless screen cylinder chemical resistance: Acid: very good resistance depending on concentration and temperature. Resistance to most mineral acids is excellent. , Alkali: limited resistance depending on concentration and temperature. Excellent resistance to low concentration lyes. Dissolves in highly concentrated lyes at higher temperatures. , Generally the screens show no evidence of toxicity and have excellent resistance to decay and bacteria. , Organic solvents: excellent resistance. Some phenolic compounds and hot nitrobenzene dissolve the screens , Oxidizing agents: good resistance
- Rubber "O" rings on both ends ensure a quality seal
- Screens have excellent resistance to most common chemicals
- Wide range of polyester and stainless steel screens in 40 to 200 mesh
SPECIFICATION - Color: Green
- Materials: O-ring: EPDM , Screen: Stainless Steel
- Maximum flow rate: 1": 13 GPM , 3/4": 11 GPM
- Maximum working temperature: 130 degree F
- Operating pressure: up to 120 PSI
- Size: 3/4" or 1"