DIG 1/4" Barbed Connector

Can't get your 1/2" mainline tubing next to every plant in your garden? Have two pieces of 1/4" tubing that you need to connect together? If that sounds like you, then the SF001 1/4" barbed connecter is exactly what you're looking for. Use this to connect 1/4" tubing to more 1/4" tubing or to 1/2" tubing. Just make sure to use 3mm punch tool like the A019 or A035 before connecting this to 1/2" tubing.

The 1/4" barbed connector is used to connect two ends of 1/4" micro tubing with .140 ID to .170 ID. The 1/4" barb connector is also used to extend the micro tubing from 1/2" or larger mainline drip tubing. The micro tubing is pushed over the barb for a very tight fit, ensuring the tubing doesn't fall off and preventing leaks. This fitting is compatible with both vinyl and poly 1/4" micro tubing, 1/4" dripline, and 3mm holes punched in 1/2" or larger tubing.