36" X 1/4" Vinyl Micro Tubing with Barb
TDS Model #
T031
| Manufacturer: | DIG |
|---|---|
| Manufacturer #: | 50-151-36 |
This product qualifies for Free Shipping With an order total of $50 or more.
(Excluding Tax & Shipping)
Details Here
- RELATED PRODUCTS
- DESCRIPTION
- FEATURES
- SPECIFICATIONS
- REVIEWS
This is a 36" X 1/4" tubing assembly with a 1/4" barb at one end. The tubing used for this assembly has thicker walls that help it accept micro-sprayers with a 10/32 threaded end. However, this means this tubing can be difficult to get a standard 1/4" barbed fitting into. Make sure not to over-tighten the component screwed into this tubing as this can weaken the holding power of the tube. If you do over-tighten just cut off a small piece of the tube and start over.
- FEATURES
- Available in lengths of 24, 36, and 48 inches with preassembled ¼ inch barb
- Available in black color
- Different lengths for mounting flexibility
- Can support a wide range of flow rate micro sprinklers and micro sprayers, keeping head loss down
- Softer, more flexible, and easier to use than polyethylene micro tubing
- Meets the demands of micro sprinkler systems in agriculture and landscape irrigation
- Made of commercial grade vinyl resin
- Outstanding environmental stress resistance
- UV protected
SPECIFICATION - Size: 1/4 inch, .160 ID x .270 OD with pre-inserted barb
- Length: 36 inches
- Maximum operating pressure: up to 40 PSI
- Color code: black
- Maximum flow rate suggested: 42 GPH with a head loss of 5.6 PSI
- Bending radius: 1 foot
- Manufacturer ‘s warranty: Five year limited warranty
- Material: UV protected premium vinyl resin