6" Semi-Rigid Poly Riser with 1/4" Barb

This tube is a much thicker walled tube at .160 ID X .300 OD. The tube will not bend over but you will need something to hold it upright, use our S001 Clip Stake Listed below in the "Related Products" Section.

The semi rigid poly risers are accessories used to hold micro-sprinklers above the level of ground cover or plants.
May also be used to hang micro-sprinklers / misters from overhead poly tubing in green houses.
Comes with a 1/4" barb on one end to connect to any 1/2" or larger poly tube.
Use any sprinkler or mister with a 10/32 thread or Quick Thread connection.