1/2" (.700 OD) Compression x 3/4" FHT Swivel Adapter with Screen

You've got your head assembly all set up, but you're not sure how you're supposed to attach the 1/2" poly to the threaded end of your filter or pressure regulator. Sound familiar? The answer is easy: use a swivel adapter! This product is designed to allow you to attach 1/2" .700 OD poly tubing to any 3/4" MHT (male hose thread) fitting. The 3/4" FHT swivel end attaches easily to a garden hose, spigot, or any other hose thread fitting. It is compatible with our basic hose thread head assembly components like the A015 backflow preventer, F300 filter, and PR204 pressure regulator.

This fitting (and all the other 1/2" compression fittings with black ends that we sell) works with .600 ID x .700 OD poly drip tubing and brown 17mm tubing and dripline. Push the tubing into the end of the fitting firmly and at an angle, then walk it up and down while pushing in until the tubing is inside the fitting by at least half an inch. Be aware that once you've gotten the tubing into the fitting it's very difficult to remove it!