1/2" (.700 OD) Spin-Loc Connector Tee

You're between a rock and a hard place: your vegetables to your left, your flower bed to your right, but only one line of 1/2" tubing. Luckily, you don't need to choose! Use the LF051 1/2" spin-loc tee to split your line in two and water both your veggies and your flowers. This item will enable you to run two lines of 1/2" .700 OD poly tubing in opposite directions from a single starting point, adding a ton of versatility to your irrigation system.

This fitting (and all the other 1/2" spin-loc fittings that we sell) works with 1/2" .600 ID x .700 OD poly drip tubing, but it unfortunately will not work with 17mm dripline. For that, you'll want a compression fitting like the LF005.

To use this fitting, screw the nut all the way down against the base of the fitting, push the tubing onto the barb, then screw the nut back down over the tubing. Do not unscrew the nut and push the tubing through it, that's not the way the fitting is designed to work!