3/4" Compression x 3/4" FHT Swivel (.940 OD)

You've got your head assembly all set up, but you're not sure how you're supposed to attach the 3/4" poly to the threaded end of your filter or pressure regulator. Sound familiar? The answer is easy: use a swivel adapter! This product is designed to allow you to attach 3/4" .940 OD poly tubing to any 3/4" MHT (male hose thread) fitting. The 3/4" FHT swivel end attaches easily to a garden hose, spigot, or any other hose thread fitting. It is compatible with our basic hose thread head assembly components like the A015 backflow preventer, F300 filter, and PR204 pressure regulator.

This fitting (and all the other products on our 3/4" fittings page) works with .820 ID x .940 OD poly drip tubing. Push the tubing into the end of the fitting firmly and at an angle, then walk it up and down while pushing in until the tubing is inside the fitting by at least half an inch. Be aware that once you've gotten the tubing into the fitting it's very difficult to remove it!