This product qualifies for Free Shipping With an order total of $50 or more.
(Excluding Tax & Shipping)
Details Here
Our garden bed irrigation kits come in four sizes: mini, small, medium, and large. These kits are built within the specs of the ½” poly tube and fittings included. The mini, small, and medium kits have maximum flow rates of 52 gph, 104 gph, and 208 gph respectively, all of which are below the flow rate capacity of ½” poly tube. This means that you can use all the ¼” drip line included in those kits on a single line of poly tube. Our large kit has a maximum flow rate of 416 gph. While this does exceed the maximum flow rate of a single line of ½” poly tube (220 gph), we have provided enough poly tube and head assembly components to create two separate systems, giving you plenty of head room. This is accomplished with a “Y” ball valve which allows you to connect to separate lines of poly tube. Please keep in mind when installing either system that you do not exceed the 220 gph threshold of a single line of ½” poly tube.
- Connection to hose spigot with backflow prevention, screen filter, and pressure regulation.
- Fittings for ½” poly tube are compression style meant to fit on the exterior of the tube. Fittings for ¼” poly tube are barbed.
- Contains non-pressure compensating ¼” drip line.
- Allows the ability to irrigate raised garden beds with plants spaced evenly in rows. Drip line can also be utilized to coil around the base of a plant above their root zone for even water distribution.
- Manual poly tube ball valves provided in this kit can be utilized to isolate areas to adjust watering times between zones.
- Can be installed above ground or underground in low foot traffic areas.
- Materials in this kit are UV protected and have fantastic resistance to environmental stress.
SPECIFICATION | - Kit Specifications: o Operating Pressure (with Pressure Regulator): 25 PSI o Maximum flow rates: Mini: 52 gph Small: 104 gph Medium: 208 gph Large: 416 gph - ½” Polyethylene Tube and ½” Compression Fittings o Poly Tube Dimensions: .600 ID x .700 OD o Recommended Pressure Range: 25-30 PSI o Maximum Lateral Run: 400’ o Maximum Flow Rate for Single Line: 220 gph - ¼” Polyethylene Microtube and ¼” Barbed Fittings o Poly Tube Dimensions: .170 ID x .250 OD o Recommended Pressure Range: 25-30 PSI o Maximum Lateral Run: 30’ o Maximum Flow Rate for Single Line: 30 gph - ¼” Drip Line, 12” Spacing o Drip Line Dimensions: .170 ID x .250 OD o Recommended Pressure Range: 10-25 PSI o Maximum Lateral Run: 30’ o Flow Rate at 25 PSI: 0.64 gph |
---|