This product qualifies for Free Shipping With an order total of $50 or more.
(Excluding Tax & Shipping)
Details Here
Our landscape and garden irrigation kit comes in four sizes: mini, small, medium, and large. These kits are built within the specs of the ½” poly tube and fittings included. The mini and small kits have maximum flow rates of 169 gph and 219 gph respectively, both of which are below the flow rate capacity of ½” poly tube. This means that you can use all the ¼” drip line, emitters, and adjustable sprayers included in those kits on a single line of poly tube. Our medium and large sized kits have a maximum flow rate of 383 gph and 438 gph. While this does exceed the maximum flow rate of a single line of ½” poly tube (220 gph), we have provided enough poly tube and head assembly components to create two separate systems, giving you plenty of head room. This is accomplished with a “Y” ball valve which allows you to connect to separate lines of poly tube. Please keep in mind when installing either system that you do not exceed the 220 gph threshold of a single line of ½” poly tube.
- Connection to hose spigot with backflow prevention, screen filter, and pressure regulation.
- Fittings for ½” poly tube are compression style meant to fit on the exterior of the tube. Fittings for ¼” poly tube are barbed.
- Contains pressure compensating emitters, adjustable stake emitters, and ¼” drip line.
- Allows the ability to irrigate a variety of plants ranging in size from small trees and shrubs to individual fruiting plants, all at the same time.
- Manual poly tube ball valves provided in this kit can be utilized to isolate areas to adjust watering times between zones.
- Can be installed above ground or underground in low foot traffic areas.
- Materials in this kit are UV protected and have fantastic resistance to environmental stress.
SPECIFICATION | - Kit Specifications: o Operating Pressure (with Pressure Regulator): 25 PSI o Maximum flow rates: Mini: 169 gph Small: 219 gph Medium: 383 gph Large: 438 gph - ½” Polyethylene Tube and ½” Compression Fittings o Poly Tube Dimensions: .600 ID x .700 OD o Recommended Pressure Range: 25-30 PSI o Maximum Lateral Run: 400’ o Maximum Flow Rate for Single Line: 220 gph - ¼” Polyethylene Microtube and ¼” Barbed Fittings o Poly Tube Dimensions: .170 ID x .250 OD o Recommended Pressure Range: 25-30 PSI o Maximum Lateral Run: 30’ o Maximum Flow Rate for Single Line: 30 gph - ¼” Drip Line, 6” Spacing o Drip Line Dimensions: .170 ID x .250 OD o Recommended Pressure Range: 10-25 PSI o Maximum Lateral Run: 18’ o Flow Rate at 25 PSI: 0.64 gph - Pressure Compensating Emitters o Flow Rates: 0.5 gph (Brown), 1 gph (Black), 2 gph (Green) o Operating Pressure: 8-50 PSI - Adjustable Stake Emitter o Flow Rate Range: 0-10 gph o Operating Pressure: 10-30 PSI o Emitter Pattern and Diameter: 360 degree spray and 3’ coverage |
---|