Senninger 25 PSI PMR-MF Pressure Regulator, 3/4" FPT

A pressure regulator is a device used to reduce and regulate the water pressure entering a drip system so it matches the pressure needed by the system. The Drip Store's range of heavy duty pressure regulators offers exceptional outlet pressure control and provides consistent performance at flow rates from 120 to 1200 gph. These regulators are preset to their stated pressure and utilize minimal moving parts, with a sophisticated diaphragm design that regulates itself in reaction to the overall back pressure in the system. All of our preset pressure regulators use high strength ABS plastic material and all joints are sonic welded into an impact-resistant plastic housing.

Picture #1

1.  3/4" PVC pipe
2. PA-34-002 PVC Adapter
3. 3/4" MPT x MPT Filter (such as the F303)
4. Any heavy duty or 3/4" Senninger pressure regulator, like the one you're looking at right now!
5. R302 3/4" Nipple
6. LF011 Poly Tube adapter (.700 OD poly tube)

Picture #2

1. 3/4" PVC Pipe
2. PA-34-003 PVC Adapter
3. C022 3/4" Valve with 24 VAC solenoid. (you can use any 3/4" size valve)
4. 3/4" MPT x MPT Filter (such as the F303)
5. Any heavy duty or 3/4" Senninger pressure regulator, like the one you're looking at right now!
6. R302 3/4" Nipple
7. LF011 Poly Tube adapter (.700 OD poly tube)